Categories Of Carbon Steel Their Compositions Engineering Essay

‘STEEL ‘ is used for assorted metals of Fe. These vary from each other depending on the content and % of stuff added to the Fe base solution. On must maintain an of import factor in head, all steels contain a % degree of C + Manganese + Silicone + Sulpher. By increasing C to establish solution the stuff will increase strength and hardness therefore improves drastically the harden-ability. On the other manus C reduces the capableness of weld-ability and increases crispness. Several types of steels exist in our markets, the most common being ; field C, chromium steel, alloyed and tool steel. Carbon steel is one of the largely used steels in several industries. As explained antecedently, its belongingss are dependent largely on the % of C added but the other elements have minor influence excessively. One of import factor sing Plain Carbon Steel, is that this is a type of steel incorporating up to 1.5 % of C. One must foreground that most of the C add-ons in C steel are less than that of 1 % . Some applications of these steels are structural beams, auto frames, etc. ( Capudean, 2003 ) ( Iron Making & A ; Steel MAking, 2008 ) ( Jr. , 2007 ) Harmonizing to the ‘Steel Classification Society ‘ , Carbon steels are sub divided into four chief classs ; – Low Carbon Steels /Mild Steels ; these steels have less than 0.25 % of C, and these are the largely used class of C steels. Normally this type being unresponsive to heat interventions, intended to organize a martensitic construction, beef uping is achieved by cold working the portion due to low C content. These are really easy to organize steels with accomplishing popularity largely for not high strength applications. Some belongingss are ; Very tough, inexpensive sing costs ( least expensive to bring forth ) , they are easy machined ( more ductile than high C steels ) and welding belongingss are besides really good. Typically these have 275MPa – output strength, 450 – 550 MPa – tensile strength, and 25 % EL – Ductility. For such a ground, these are normally used in applications as Bridgess due its ability to deform under burden and return to its original. ( B ) ( Capudean, 2003 ) ( Groover, 2010 ) Degree centigrades: UsersNathanielDesktopRoadRailBridges.gif Medium Carbon Steels ; incorporate 0.25 % up to 0.55 % C. When it comes to belongingss, increasing C besides means a direct influential addition in hardness + tensile strength. On the other manus this besides effects severely the ductileness which makes it more hard to machine. Heat intervention to really thin subdivisions can better such machinability issues. These may be austinized by slaking and annealing afterwards to better such belongingss. These are comparatively stronger than the old class, whilst weaker than the high C steels. One common application of medium C steel is the production of crankshafts where high strength and stiffness is required to defy high tonss and opposition to tire when it comes to uninterrupted tortuosity and bending. Typical values are, 450-580MPa – output strength, 600-750 MPa – tensile strength, and 20-30 % EL – Ductility. ( Corus, 2010 ) ( Jr. , 2007 ) ( Iron Making & A ; Steel MAking, 2008 ) Degree centigrades: UsersNathanielDesktop1108phr-03+383ci-small-block-chevys+pistons-and-crankshaft.jpg High Carbon Steels ; incorporate 0.6 % up to 1.4 % of C. In a heat treated status it is able to defy high shear and wear hence, these are used in applications where stiffness and hardness play an of import portion such as in rope wire, besides good in prolonging crisp film editing borders. Unfortunately, these are the least malleable and really difficult to weld, in fact preheating and station warming ( commanding of chilling temperature ) is critical in order to obtain good welding sections and accomplish good mechanical belongingss. Since at their maximal hardenable conditions, these are the most brickle devising this a large drawback for this steel. ( B ) ( Jr. , 2007 ) ( Groover, 2010 ) Degree centigrades: UsersNathanielDesktopwire-rope2.jpg Very High Carbon Steel / Tool Steels ; are a ‘sub group ‘ of high C steels and contain lower limit of 0.8 % C. These have weak welding belongingss and ductileness, but are really good when it comes to strength, hardness and wear opposition that ‘s why it is really normally used in centre clouts. An of import factor for these sorts of steels is that most of them are used in a hard-boiled + tempered status. ( Jr. , 2007 ) ( Groover, 2010 ) Degree centigrades: UsersNathanielDesktop oolsteel.jpgP7: Question 2Select an industry and supply a brief over position of one metal forming technique used.The preciseness metal organizing procedure I will be discoursing is the Powder Formation ( PM ) . This gives an alternate cost effectual range towards stomping, hammering, machined parts and projecting. This is characterized one of the most enforced preciseness metal organizing technique in the modern industry and it is normally found in the automotive industry. Most vehicle parts presents are produced by such a procedure. PM combines pulverization compression with optimum physical belongingss with controlled high temperatures atmosphere sintering. ( Turkish PM ) Degree centigrades: UsersNathanielDesktopimage001.gif Such a procedure offers ideal benefits that you can non accomplish with using other metal working procedures. Mentioning merely a few, it is really material efficient since the finished portion uses 100 % of the stuff, whilst in other organizing techniques one will hold wastes. The procedure is really good in making intricate forms with minimum cost add-on. Some illustrations could be splines, cogwheels, away centric parts, etc ) . Sometimes this besides reduces assemblies since most of the assembly parts can be produced in a individual formation by PM. The PM clouts and rods produce parts with closer tolerances. A assortment of standard metals are specifically suited for PM processing, nevertheless intermixing can be easy done to run into specific belongings demand. Automatic rhythms make the PM procedure really labour efficient. The lone back draw is to put up the parametric quantities for the tooling, but as this is done, the procedure can bring forth parts at a really efficient r ate. High temperature Powder Metal ( HTPM ) , is able to accomplish 88-96 % of the material theoretical denseness. Since every stuff belongingss depends on denseness ( elongation, output strength, etc ) , HTMP outperform other procedures. ( GT.b, 2012 ) ( J, 2011 ) ( Marciniak, 1988 ) The high temperature metal pulverization procedure is divided into 4 chief sectors ; Blending – here high pureness metals pulverizations and additives are studied so funneled down to choose the optimal pick for the application in order to run into the coveted belongingss to the application. For illustration in the automotive industry, this procedure is used to organize panels. Here aluminum pulverization with anti oxidation additives and silicone for elastic belongingss are added in order to organize the ideal mixture for the door panel. All the pulverizations are assorted with particular lubricators which helps treating the pulverization flow. As mentioned before, blending the pulverizations in a solid province provides new chances to come up with new belongingss unique merely to HTPM. Compacting – Powdered metal is fed from a hopper into a provender shoe. The provender shoe delivers it into a die pit. Here multiple pulsations compress it into 50 % of its original capacity. Second strength packing forces realign and deform the atoms whilst implementing local mechanical bondings organizing a portion known as ‘a green portion ‘ . These are ejected carefully by automated machines and conveyed to the following measure. Compacting imperativenesss vary from 5 up to 900 tones and are capable of multiple gestures. Sintering – this involves puting the green portion in temperatures above 1300AÂ °C ( but below runing points ) . By such a procedure a batch of benefits are achieved, metallurgic bonding is enhanced, ductileness and stamina are besides improved. The initial art of the procedure cleans lubricators and surface of the metallic atoms to guarantee perfect mechanical belongingss sing the finished constituent. At the 2nd portion of this procedure ( go forthing portion in high temperatures ) , this allows energy to transform mechanical bonds to metallurgical bonds. Completing – sizing / coining are post operations that can be used for more complicated and minor tolerance dimensions, ( illustration – engine parts like cylinder valves, linking rods, etc ) . Extra coating assets could be milling, crunching etc. From here it can come on to a connection procedure. After joined this can besides be heat treated and plated. Heat intervention goes up to 550AÂ °C to do a bed of Fe3O4A which acts as corrosion resistant, and increase in hardness. ( N.A. ) ( GT.b, 2012 ) ( J, 2011 ) ( Marciniak, 1988 ) Note- A presentation will be held in category explicating the procedure in more item. Degree centigrades: UsersNathanielDesktopcycle.jpgP8: Question 3Distinguish between merger & A ; non merger, besides select one procedure and discuss. Finally supply one application and besides discuss.Welding is a procedure to bring forth high strength lasting articulations between two ( or more ) parts that need to be connected with each other by agencies of a weldment ( metallurgic fall ining subdivision ) . There are assorted ways to obtain such a connexion and with today ‘s engineering we are accomplishing better belongings results when it comes to post welding belongingss. Chiefly the procedure involves heating a portion, runing the portion / base metal ( depending on which procedure is adopted ) and connection of the stuff occurs as temp start to chill down. Thus the procedure required relies chiefly on the application of heat and force per unit area. One common welding factor is that the metallurgic construction of any metal will be changed station to welding. This coul d take to a station welding heat intervention procedure. ( T, 2010 ) ( Key to metals, 2007 ) Welding is divided into two chief groups, depending on the physical province of the base metal during the procedure that of the base metal being in liquid province or in solid province. These procedures are better known as merger and non merger welding techniques. In order to choose which welding procedure demands to be selected one should first analyze both the welding procedures and addition information sing pre dyer's rockets and station dyer's rockets. ( YAÂ ±lmaz, 2007 ) Fusion / Liquid State Welding ; this is the most common type of welding found in the industry due that the dyer's rocket produced is really strong. In this sort of fall ining procedure, the base metal is melted in order for the dyer's rocket to happen. Apart from the heat beginning a filler stuff ( consumable electrode ) may be fed besides into the welding pool. This procedure may besides utilize a protective bed between our environing atmosphere and the liquefied metal ( gas shield or flux ) . This protection consequences in a scoria on top of the welded seam which subsequently on solidifies and can be removed. There is a assortment of merger welding processes that can be used holding a different belongings result. ( Marinov ) Three major classs of merger welding are found which are bomber divided into different procedures ; Arc Welding: in this sort of procedure warming and thaw of the stuff is done by an electric discharge. Some illustrations of discharge welding could be ; Shield metal discharge welding, , Gas tungsten arc welding, Plasma discharge welding, Gas metal discharge welding, Flux cored arc welding, Submerged discharge welding, Electroslag welding. Gas Welding ; for this sort of welding the gas produces a fire that melts the basal stuff. An illustration of such procedure is ; Oxyacetylene welding High energy beam welding ; here a high energy beam is shot between the two parts held together under force per unit area. As the temperature starts diminishing after the beam Michigan, the parts start to bond together. Some illustrations of this procedure are ; Electro beam welding & A ; Laser beam welding. Basically all the procedures reference antecedently for merger has the same principals. A heat / energy beginning is concentrated on a really little country and a weld pool is produced. These heat beginnings for merger are arc, high energy beams and gas. Obviously the power denseness rises from gas fire to an electric discharge to a high energy beam. For the classs mentioned below we can analyze a graph demoing the heat input to the work piece vs power denseness of heat beginning. It is reasonably obvious that as the power of the heat beginning additions, the heat input to the welded portion decreases. Therefore the less the power denseness of the beginning the larger the affected country. Excessive clip for heating can do harm to the work piece, by changing the belongingss including deformation and weakening. ( Schwartz, 1979 ) Degree centigrades: UsersNathanielDesktopUntitledff.png Therefore one of the advantages on power denseness increaser is deeper incursions, optimum welding qualities, and less exposure clip for the welded portion. This procedure is besides various, and adaptable for confined infinites. On the other manus some disadvantages are, it is non every bit productive as uninterrupted wire applications, current bounds are critical to find the joint potency. ( Liverpool, 2000 ) Non Fusion / Solid State Welds ; for this type of welding heat is applied merely for the base metal to soften in its solid province in order to ease fictile distortion or rush up the solid province diffusion. As the name provinces, in non merger welding the stuffs are joined together without the demand of runing the base metal. Here the stuffs to be joined are brought together at equilibrium spacing for fictile distortion through high temperatures ( below runing point ) and force per unit areas. Some of the chief non merger welding techniques are ; Cold welding: In this procedure the dyer's rocket is achieved by the force per unit area and little lift in temperature due to cold working. Some typical illustrations are ; Press welding & A ; Roll Welding. Clash welding: For this procedure the dyer's rocket is achieved due to the heat produced due to using force per unit area between the parts i.e making clash. Some illustrations are ; Radial Friction welding & A ; Orbital Friction Welding. Diffusion Welding: here both parts are held together under changeless force per unit area, promoting the temperature somewhat and left invariable for a peculiar clip frame ( depending on the stuff ) . Some illustrations are ; Conventional Diffusion welding & A ; Deformation Diffusion welding Solid State Deposition Welding: Chemical reaction bounding. Degree centigrades: UsersNathanielDesktopspwmtfeb2001f1.jpg The first advantage of such a procedure is that low heat is required, hence minimum disruptors in crystalline construction are noticed since no thaw temperatures are required. This could besides be applied for stuffs within the same category or even within different categories due that no intermixing is involved. The chief disadvantage is that for such a procedure big, fixed machineries are required and this is a consequence for big capital financess to purchase the equipment required. Another disadvantage is that this procedure is non really feasible to be applied for little graduated table applications since its complicity. ( Jr, 2004 ) ( Lancaster, 1999 ) Describing one peculiar welding method, the method I will be discoursing is the ‘Hyperbaric Welding Process ‘ normally known as under H2O welding. This procedure falls under the class of Fusion welding. This is a really good illustration of welding in an unusual, critical environment. For such a procedure the welder must be an A class welder plus a commercial frogman in order to defy the harsh and unsafe sea conditions nature has to offer. ( Mukund, 1974 ) Degree centigrades: UsersNathanielDesktop2071602_f520.jpg In order to delegate instantly the procedure with an application mentioning advantages, disadvantages, equipment, restrictions and safeguards, the underwater welding is a procedure used in the offshore industry. The offshore industry covers the fixs of vass ( any kind ) , boring platforms ( jack up rigs, semi submergible rigs, self propelled rigs ) , Bridgess, etc. These constructions face terrible conditions conditions and are invariably flexing in multi conditional environments, hence the hazard of harm and failure is far greater. Basically this sort of welding is ideal and it is really flexible since the work could be done under the water line, therefore the natation works could be repaired in place without the demand of docking the platform to obtain dry conditions. This consequences in less sweeps and loss of valuable boring clip. Restrictions of such a procedure for our boring platform application are that the system is necessarily bulky and expensive to run. For such an application normally low to intercede C steels are used. Steels are designed as CT and a figure after to demo the C content. The most common steel found in this industry is CT3. Low and intermediate C steels are ideal since these have high malleability and sensible dyer's rocket ability. A The weld ability of depends on their C + manganese content in concurrence with their dross degrees. At low C degrees that of less than 0.15 % , the steels are non difficult and the dyer's rocket ability is excellent.A For the medium C type, 0.30 – 0.60 % C is found and these can be welded easy by agencies of discharge welding. Unlike the surface normal discharge welding, where such intermediate C have higher hardness and martinsite formation, in dry conditions pre warming and station warming are required. For deep sea dyer's rockets alternatively of pre warming and station warming, the dyer's rocket is non performed at one spell but with intermediate intermissions. ( Martikainen ) ( Sacrificial Metal, 2012 ) Degree centigrades: UsersNathanielDesktopcorrosion_drill ( 1 ) .jpg Basically there are two categorizations to execute submerged welding. The choice of the proper method is selected after an submerged structural / hull study and the parametric quantities of the submerged environment. The welding categorizations are ‘Dry Welding ‘ & As ; ‘Wet welding ‘ . Wet Welding ; here the welding is performed to the direct exposure of the wet conditions. Here the ‘Manual Metal Arc ‘ procedure is used. The principals of such a procedure are fundamentally the same as that of Arc Welding on dry land but in this instance a particular H2O cogent evidence electrode is required in order to protect the electrode ‘s nucleus. This is the most efficient and cost effectual welding method found amongst all under H2O welding. For this method the power supply is located on the surface of the H2O ( dry conditions ) and the overseas telegrams and hosieries are fed to the frogman via overseas telegram defenders ( big flexible piping ) . The power supply provenders direct current ( DC ) 300 – 400 As through overseas telegrams with negative mutual opposition. If positive mutual opposition is used in DC electrolysis will occour and causes rapid impairment of the metallic constituents in the electrode manus held holder. DC currents are used alternatively of AC ( Alternating ) due to electrical safety and the trouble of keeping the discharge in wet conditions. Motor generator welding machines are normally used. For the moisture type welding it is of import that the circuit includes a knife switch ( Positive type ) . This sort of switch is operated on the surface but eventually commanded by the frogman for optimal safety. This switch should be capable of interrupting the full welding current and stops the dyer's rocket ax the switch is non-operated. As mentioned antecedently, even the electrode itself should hold a particular coating of waterproofing. Basically all connexions should be insulated in order that no H2 O comes in contact with any metal parts. If this insularity is damaged, current will leak and will non be available in the discharge. ( Levi, 2010 ) This method is low cost compared to dry welding, it is besides an onsite occupation i.e. no demand of complex equipment an the frogman can make places of the offshore construction that could non be reached by other types of welding. Some disadvantages are that there is an immediate quench of the welded articulation due to environing Waterss ( additions tensile strength – decreases ductileness & A ; increasure in porousness and hardness ) .large sums of H is present taking to disruptions. H2 dissolves in heat affectional zone and the welded articulation could check. The chief disadvantage is the safety issue sing visibleness and currents Degree centigrades: UsersNathanielDesktopWelding.Programs.jpg Hyperbaric Dry Welding ; here the dyer's rocket is done in a certain chamber. This chamber is normally filled up with He incorporating 0.5 saloon of O at positive force per unit area somewhat above ambient. These dyer's rockets are somewhat higher in quality that of moisture welding and run into X-ray cryptography demands. For such a procedure the ‘Manual Metal Arc ‘ is used or the ‘Gas Tungsten Arc ‘ welding is used ( depending on the welder accomplishments ) . The welding is done in dry conditions but at hydrostatic force per unit areas of the deepness of the environing sea. For the dry dyer's rocket procedure the welding power generator could be AC and DC. Degree centigrades: UsersNathanielDesktopCommercialDryBell.jpg Some advantages of dry welding are that the frogman is safer since the dyer's rocket is performed in an enclosed chamber, hence no direct distractions from currents, and visibleness is much better than moisture welding since the chamber is illuminated. Good quality dyer's rockets are achieved comparable to come up welding and H2 degrees are much lower than H2O dyer's rockets, not distructave proving could be performed in the chamber. Some disadvantages are that the procedure requires much more capital and support at the surface as the method is much more complex, the cost additions with deepness, and the procedure is non every bit flexible as the unfastened H2O dyer's rocket as the connection subdivisions should suit the enclosed chamber. ( Akers, 2012 ) To depict the procedure of Manual Arc Welding, the work that is traveling to be welded should be straight connected to the positive side of the electric circuit via overseas telegrams. Sometimes the Earth overseas telegram incorporates more than 1 connexion in order to obtain the best circuit continuity for the land. A flux ( plus H2O proofing ) electrode is connected to the manus held holder via another overseas telegram which are connected to a power welding coevals beginning. When the tip of the electrode touches the work piece, the current discharge from the spread and causes a flicker which melts the base metal and the electrode organizing a dyer's rocket puddle. Degree centigrades: UsersNathanielDesktopwelding-circuit.gif Comparing both diagrams we can detect some differences. For the moisture procedure, DC current, a knife switch and dual insularity overseas telegrams are required. The mutual opposition is -ve, whilst the circuit is fundamentally the same. As the discharge is moved off from the work piece, the pool solidifies and the articulations are fused together. This welding pool is controlled by changing the current which flows through the discharge being produced and by altering the electrode diameters. Typical temperatures are those of 5000Â °C. by such a procedure a consequence of metallurgical bonding is achieved through the work piece. At these elevated temperatures, metals are ‘active ‘ and if it comes in contact with air it rusts immediately and the mechanical belongingss of the joint fail. For such a ground the discharge welding provides agencies of screening to the dyer's rocket pool ( gas, scoria ) . This is known as metallic discharge shield and is accomplished by the flux covering the electrode nucleus. The scoria produced as the pool cools and solidifies has its map to minimise contact of dyer's rocket to air until temp lessenings. The discharge creates a little pit formed inside the flux. This is for the flux to fire slower than the metal barrel i.e. helping in the protection and control of the metal sedimentation that leave the electrode. For the welding procedure this is a critical in order to keep a changeless discharge and weld articulation. Even in hapless under H2O visibleness, the frogman needs to maintain force per unit area on the electrode to keep a changeless good provender rate. In under H2O welding in is really of import to advert that the discharge behaves otherwise than it does in air. In H2O gas bubbles are a really of import factor as these create an unstable discharge for good welding conditions. In concurrence with this, it is much more hard to command the dyer's rocket puddle. The frogman must put currents by test and mistake depending on the Waterss conditions ( temp, salt, etc ) . Apart from this there is no difference between surface and under H2O welding. ( Kaets, 2000 ) Degree centigrades: UsersNathanielDesktopshielding-weld-arc.gif When compared to other welding procedures Manual discharge welding is normally used because the equipment is comparatively easy to utilize and inexpensive ( compared to other types ) , it is flexible, portable, and ideal for the frogman to utilize in confined infinites, no gas shield is required and eventually it is suited for about all sort of metals and metals. Some disadvantages of discharge welding are that the electrode needs to be replaced often ( more exposed to daze ) , the scoria should be removed after the dyer's rocket is performed, and the procedure is somewhat slower since the rate of deposition is slower than continuously fed electrode procedure ( Gas Tungsten Arc ) . ( Kaets, 2000 ) One last note sing under H2O welding ; there is a procedure non normally used which features a specially built keeping torch which sprays a changeless cone made of high force per unit area H2O, with protective gas under force per unit area to insulate the welded are from the H2O during the dyer's rocket is performed. Besides a recent development was done affecting under H2O optical maser beam welding. This method is still being improved but will shortly be applicable for the offshore industry. ( Clutter, 2012 )

Nonverbal Communication Cod Essay

1. What nonverbal messages are being sent in this image? 2. What type of nonverbal communication codes are being used to deliver the messages? 3. What effect does each message have on the other people in the image? 4. What nonverbal communication skills and strategies could be used to communicate effectively in this situation? 1. What cultural barriers are seen in this image? 2. What type of nonverbal communication codes are being used to deliver the messages? 3. What effect does each message have on the other people in the image? 4. What nonverbal communication skills and strategies could be used to communicate effectively in this situation? 1. What nonverbal messages are being sent in this image? 2. What type of nonverbal communication codes are being used to deliver the messages? 3. What effect does each message have on the other people in the image? 4. What nonverbal communication skills and strategies could be used to communicate effectively in this situation? 1. What cultural barriers can be seen in this image? 2. What nonverbal messages are being sent in this image? 3. What type of nonverbal communication codes are being used to deliver the messages? 4. What effect does each message have on the other people in the image? 5. What nonverbal communication skills and strategies could be used to communicate effectively in this situation? 1. What cultural barriers can be seen in this image? 2. What nonverbal messages are being sent in this image? 3. What type of nonverbal communication codes are being used to deliver the messages? 4. What effect does each message have on the other people in the image? 5. What nonverbal communication skills and strategies could be used to communicate effectively in this situation?

Nintendo †Creative Product Promotion Essay

When Nintendo release a new console or game, they usually conduct a large marketing product to make their products appeal to the mass market. The first way that Nintendo advertise is through television, they usually have their advertisements shown throughout the day and in the evening in order to try to appeal to the family market because Nintendo’s products are usually targeted towards families and children. Nintendo in their television adverts try to make the view have the desire to buy the product, an example of this could be the initial marketing of the Nintendo Wii where the advertisements on television where an showing how people could become fitter by playing Wii games therefore making people desire the product. Another way that Nintendo used to advertise their products in the UK was through advertisements in newspapers and magazines. They used this form of advertising because it appeals to a wide range of people and also the adverts can be changed to suite the target audience of the magazines. Personal Selling Due to the millions of products they sell it is hard for Nintendo to personally sell their own products face to face, most of their products are either brought from the Nintendo online or brought through retailers. Personal selling is mainly done to customers buying from retail stores from the staff trying to sell customers more accessories. When the retailers were selling the Nintendo Wii the staff had a variety of different statistics given to them by Nintendo to show the customer how good the product is and how it can influence the day to day life of the customer. Sales Promotion When the Nintendo Wii came out Nintendo and some of the major retailers selling the product created competitions giving people the opportunity to win a Nintendo Wii, this then creates a buzz around the product and people become interested in what it is and then decide they would desire the product. Nintendo also used sales promotion in retailers where they funded demo stands where potential customers can use the product to see the benefits and decide whether they would like to buy the product, creating a stand for customers to try products is costly however opens up to a wide range of customers who otherwise may not be interested in the product. Public Relations Nintendo and other large companies that have association with creating video games often release statements, images and information in the media regarding the release of their new products. As I stated before in advertising Nintendo advertises its products in many different ways including Television, newspapers, magazines and various websites online. Direct Marketing Nintendo have a section of their website called â€Å"Club Nintendo†, this is where devoted customers and hear the latest news about Nintendo products and also collect stars which can be exchanged for rewards in the shop. Email newsletters are distributed to members of Club Nintendo telling them about upcoming products or evens, this is a great asset to Nintendo as a company because it allows them to build a solid customer base. Walkers Advertising Walkers main form of advertising is through television, this is because crisps appeal to a very wide group of people which affects almost all demographics. Walkers advertise by using ex footballer and television presenter Gary Lineker, this endorsement attracts attentions because Lineker is a well known celebrity and has a comical acting style within the adverts making them entertaining rather than giving information regarding the product. Another way Walkers advertise is through the press this is very important because it attracts a wide range of audience and does not single out one demographic. Personal Selling Due to the product not being large and expensive enough to make one sale make a big difference, walkers to not focus on personal selling. Walkers mainly concentrate on appealing to the mass market, they do this through mainstream advertising and often get involved in helping fund raising for various charity events such as comic relief and cancer research. Sales Promotion The major way that Walkers do sales promotion is through completions they advertise their competitions on television, press and on the packaging itself. Walkers have a separate website just for completions where customers can view and enter all the competitions. The latest competition that Walkers held gave customers the chance to win ? 50,000 through guessing the flavour of a packet of one of their mystery crisps. When deciding how to advertise this competition Walkers had to make a decision whether to advertise it on television, they saw it worthwhile to advertise on TV because if people saw the product in the supermarket without advertising on they may not know there is a competition so with the advertisement on the television then they will see the â€Å"? † on the packaging and be attacked to that product because they have seen it on television. Public Relations Walkers use public relations such as press interviews and articles when they are introducing an new product or altering a classic. More and more products are being cutinised for being unhealthy for the nation, Walkers have reduced the saturated fat in their products by 50% over the last decade whilst maintain the same taste, this has attracted much attention from the media as they see Walkers are working hard to develop new products that will aid the country to become healthier. Direct Marketing Walkers have a section of their website where customers can sign up and hear about the latest games, news and competitions through e-mail. This gives Walkers the chance to advertise there products cheaply and in greater detail to the people who enjoy the product.

What are Effective Ways of Coping with Anxiety and Nervousness in Essay

What are Effective Ways of Coping with Anxiety and Nervousness in Teaching - Essay Example   Learners for the lessons were non-native English-speaking students. The English Language Institution was chosen for this teaching practice. This course is designed for someone who wishes to visit an English-speaking country soon, and it is also suitable for students who are studying English for educational reasons. At the moment, the learners level of English is approximately the lower intermediate level. The class size will be no more than 10 students, who will be at least 16 years old. The main purpose of this lesson is to introduce new vocabulary and simple grammar. Students will be able to improve their communication skills for leisurely and social purposes by engaging in authentic conversational activities; they also gain practice in using English language patterns through reading the customized text and completing predetermined gaps in the text meaningfully. By providing both controlled and freer practice, it is intended that students will become more confident in their use of English. Task-Based Language Teaching (TBLT) is the methodological framework for a lesson where tasks are used as â€Å"the core unit of planning and instruction† (Richards and Rodegers, 2001: 223). By setting difficult but achievable tasks, the students are challenged, which then facilitates learning. This lesson emphasizes the process of learning, provides the students with a natural context for language use and focuses on tasks  that are meaningful, as, without meaning, there can be no learning (Larsen-Freeman, 2000; Littlewood, 2004). Based on the TBLT, some useful lesson procedures for teaching receptive skills are developed. However, since tasks are defined in terms of what people actually do in authentic situations, there is flexibility in the pedagogical approach, so long as the learners complete the tasks meaningfully and are not expected to regurgitate others' meaning. What it means to be a teacher covers a wide scope of responsibility. As teaching is a ‘people-orient ed’ field, many considerations must be taken into account when making decisions that would benefit the majority. This peer-teaching practice has pushed me to the deepest level of introspection regarding my own beliefs and principles on teaching and education.

James, Missy, and Alan P. Merickel. Reading Literature and Writing Essay - 1

James, Missy, and Alan P. Merickel. Reading Literature and Writing Argument. 5th - Essay Example Whenever I feel accomplished, satisfied or in more common terms, successful, it is always because of some form of practicing knowledge. Essay Knowledge is power; it is a wealth that never ends. In fact, it increases by sharing; the only treasure out there that swells the more it is shared. What is the link between knowledge and individual power? There is one kind of power, which involves the physical strength, while the other is the brains behind that power, that develops strategies and tactics that channelizes the power and turns it into more productive force. The implied claim in Dickinson’s Much Madness is Divinest Sense (1862) is the knowledge, true and unprecedented, revelation based knowledge comes through madness. It is not the madness that the common people are used to. Majority, as the poem rightfully points out, goes along with ‘much sense’, rationalizations and probably conformity to the norms. The poem claims that the person who possesses knowledge and individual power might appear odd, the one who stands out from the crowd, and the person who has the right amount of madness. The poem by Dickinson doesn’t specifically quote example or evidence. ... History shows us that all great men, possessed some form of knowledge, their knowledge was the only reason history remembers them after thousands of years. Talk about prophets, or logisticians, or philosophers, all possessed great knowledge that was unique to their personality. The way Sherman Alexie learned to read and write through Superman comics. And instead of becoming a pediatrician, he became a writer and a poet. Logos is the primary tool of persuasion in Dickinson’s poem. Logically, the poet tells the reader how the time shapes things, and how people accept ‘sense’ while rejecting ‘madness’. This persuasion does convince the reader as everyone experiences scenarios, where the person who deviates from the norm (sense) is treated as an outcast – an unconscious effort of rejecting knowledge and true power. Langston Hughes Theme for English B (1949) uses a combination of pathos and ethos. He gets the credibility in the poem as he is a color ed student, and that gives him the stance where other would listen to him about his troubles and how the world looks at him, and more importantly what the world expects of him. The emotional stir (pathos) comes in when he gets aggressive and addresses his instructor that whether he likes it or not, he is a part of Hughes, just the way Hughes is a part of the instructor – the gift of being an American; no one can change that. Sherman Alexie’s short story Superman and Me uses pathos as the major persuasion tool. The innocence of an Indian and the kind of difficulties an Indian goes through at school. The audience immediately feels sympathetic towards the Indian student. Probably those who treat them as other species feel guilty. Especially when Sherman tells that

Short answer questions Coursework Example | Topics and Well Written Essays - 500 words

Short answer questions - Coursework Example With two workers, Karen would make 40 stethoscopes ($400), but pay $200 in wages, giving a profit margin of $200. With three workers, Karen would make 55 stethoscopes ($550), but pay $300 in wages , giving a profit margin of $250. With four workers, Karen would make 65 stethoscopes ($650), but pay $400 in wages, again giving a profit margin of $250. With five workers, Karen would make 70 stethoscopes ($700), but pay $500 in wages, giving a profit margin of $200. With six workers, Karen would make 73 stethoscopes ($730), and give $600 in wages, meaning the profit margin is only $130, and with seven the profit margin is only $40. Taking all of this into account, it would seem that Karen should hire 4 or 5 workers, as these options both give a $250 profit margin and this gives the profit-maximizing level of output. This can be found using the formula: 2. Given the information from question 1, now say that the workers whom Karen hires get trained in new technology and learn new skills. This causes them to become more productive. Karen’s firm is the only firm to use this technology, and training does not improve the productivity of workers in firms outside of Karen’s firm. a) Will this change the quantity of workers whom Karen hires? Explain your answer. b) Will this change the wage rate of the workers in Karen’s firm? Explain your answer. (5 points) b- Different skill levels often equate to a difference in pay, and in this case Karen has hired workers trained in new technology with skills that cannot be found outside her own firm. The difference in pay rates for skilled workers can be seen as a compensation for aquiring skills (which may mean the worker has not been earning for some time) or for simply going through the lengthy and sometimes difficult process of aquiring these skills (Baumol, 2011). Additionally, as this technology is not available at other firms, workers need to have an incentive to work for Karen and undergo the relevant training, and

Human Rights Standards are Vague and Lack Effective Enforcement Essay

Human Rights Standards are Vague and Lack Effective Enforcement Mechanisms - Essay Example ..shall strive by teaching and education to promote respect for these rights and freedoms and by progressive measures...secure their universal and effective recognition and observance† (UDHR, n.d). In effect, the law clearly established the importance of establishing standards for all nations in promoting respect due to every citizen. Some of the provisions of the UDHR however, are vague and are filled with different issues in enforcement. Article 1 alone has various vague and unspecific terms which cannot be clearly pictured on a more practical application. As discussed by various legal experts, the provisions of the UDHR are vague and are too general or sweeping in their contents. They do not contain sufficient specifics in order to guide the people, and other individuals called on to implement its provisions. The provisions of the law are drafted generally and are also general in their language, without clear indications on the rights of the people being protected (Dugard, 2 009). The imprecise nature of Article 3 also leaves major gaps in enforcement, gaps which often have to be filled in by enforcers who are prompted to make their own judgment (often subjective) on the violation of the UDHR’s provisions. This declaration was originally planned as a statement of objectives to be implemented by different governments, and they were originally not part of international law. However, in 1968, the UN International Conference on Human Rights declared that the UDHR would form part of the obligations of members of the international community (Dugard, 2009). As a result, the declaration became part of the international laws applicable to all nations of the world. As such, the coverage of these laws became more extensive. In relation to the domestic implementation of the UDHR’s provisions, there are major issues in the distillation or decentralization of these laws. There are issues for some of these countries agreeing to the application of the pro visions of the UDHR (Donnelly, 1984). Some of these countries’ laws, especially those in the Middle East including Iraq and Afghanistan, conflict with the international provisions of the UDHR (Article 2) which includes provisions on the rights and freedoms of women. These nations have not adequately resolved the issue on what to do in case there is such a conflict, as such, the implementation of the UDHR’s provisions are suspended pending their decision on this matter (Koh, 1998). And for some countries, especially those in the Middle East, decisions on this matter can take years to finalize. In the meantime, violations on the provisions of the UDHR may sometimes go unpunished and even unnoticed by the concerned authorities. This was apparent in the case of Afghanistan who, for many years suffered under the Taliban rule, enduring this abusive regime. For countries with limited resources and reception of international laws, the enforcement of the UDHR may be reduced (Ko h, 1998). This would allow for the proliferation of violations in human rights in these countries, compromising the efficacy and the reach of the international laws within domestic territories. Issues on the enforcement o

International Business Essay Example | Topics and Well Written Essays - 750 words - 7

International Business - Essay Example These economic activities are vital since they (international trade) significantly lead to the increase in the growth of the gross domestic product (Elms, & Low 2013). This is the primary essential meaning of the GVC at the international and at the global levels. The report of this analysis concentrates on how individual countries benefit from the global value chains. The essay further investigates how the GVC affects the growth. In an essence, the provision of GVC within a country opens the ways of individual companies and organization to trade globally. This goes a long way in contributing to the creation of their value chains; it also gives them the opportunity to hire employees that are more competent. Iit further gives them an advantage of learning from other countries and organizations thereby developing a good culture that leads to individual prosperity and success of companies. Big companies operating under the GVC often have an advantage since they can easily get access to t he market thus having a big market share. This leads to bigger profit margins which allows them to higher technical employees, get access to modern technology, and gain competitive advantage. This is contrary to small countries and companies which survive in the Market. GVC is of little benefit since it exposes them to the competition from the companies that are already established (Gereffi, Humphrey, & Sturgeon 2005). The most competitive employees go to big companies, which are established to pay them (potential employees) as they want. There are various factors on which the dependence of the potential impact of the global value chain is inclined. First is the type and nature of the global value chain. A beneficial value chain is one which provides an opportunity from which countries and industries can learn. Without the provision of the capability of learning, the industries themselves will stagnate and never have the opportunity of advancing. The GVC should also be one, which is elastic; this is to say that the product of goods and services offered and provided by the company within a particular locality should provide opportunity of growth of other products. This gives the opportunity of industrial expansion for other industries and other businesses. According to the World Economic Forum (2013), industries in developed countries like Japan dealing with electronic equipments have had the potential of expansion to deal with other technological things. For instance, phone-manufacturing companies have often expanded to make computers and other visual and electronic devices. This is contrary to industries in other small countries which only specialize in the assembly of these machines. Their capabilities are confined to assembly and not in the manufacture of innovation of various technologies which can enable them to expand to other endeavours. The other factor is the type of business and the environmental factors in the host country and economy. It is importa nt to determine whether there is an environment friendly to industrial learning, and the skilful management of the firms. The firms must also be willing to invest in developing new skill by investing in the workforce (Koopman, Powers, Wang, & Wei 2011). This is done by continuous and ongoing trainings in a firm. It is also important to note that the benefit of the global value chain in a country is determined by whether local firms have the capability of competing in their local countries. Local competition is the stamina that can determine

Benfits of online classes Essay Example | Topics and Well Written Essays - 500 words

Benfits of online classes - Essay Example To that effect, the paper will discuss the benefits of acquiring education online. The major benefit of attending online classes is convenience and flexibility (Tomei, 2010). One listens to lectures and completes the assignments at their own schedules. This is helpful for the professionals and working students because they are able to balance their class work, family responsibilities, and personal activities. The classrooms can also be difficult for those students who struggle with concentration. One can also sit comfortably anywhere while attending the online classes. The course materials also available online enhancing the flexibility and convenience. Therefore, the convenience and flexibility of Internet-conducted classes has continued to draw more students. However, flexibility and convenience comes with a high level of discipline and organization. Equally important, learning by use of the Internet has resulted in reduction of learning costs. Most of the online programs are more affordable as compared to the traditional courses. For example, there are no commuting costs, accommodation costs, and most of the course materials are often found online free of charge. Additionally, assorted costs like parking, fuel, and motor vehicle maintenance costs do not impact on the web-based learners (Tomei, 2010). As a result, the learner is able to save money that may be used for expensive workbooks as well as texts. The affordability of attending online classes may result in more people getting access to education, thus increasing the literacy levels. Proceeding further, Tomei (2010) argues that online classes enhance the opportunities to network. The Internet provides a platform where the student can interact with numerous other students across the globe. This gives them the opportunity to discuss their work and make connections with these students regardless of their location. At the same time,

Supply and Demand Essay Example | Topics and Well Written Essays - 250 words

Supply and Demand - Essay Example The law of demand in economics states that with all aspects (tastes, expectation, and income) held constant; highly priced commodity will have a low demand (D1). Whereas, that of supply argues that with an increase in supply, the price (P1) of commodity will significantly reduce. An increase in demand (D2) along the curve of supply results to increase in the price (P2) of commodity; and a higher equilibrium quantity. Similarly, a reduction in the level of supply (S1) leads to a shift of the demand curve; to a high price on the equilibrium and a reduced equilibrium quantity. Efficient market theory refers to an analysis in a free market system regarding behavior of prices. It is tasked with the responsibility of determining whether prices accurately reveal essential information; necessary in determining the proper allocation of limited resources among diverse uses (Slee, 2011). Surplus implies that the capacity in demand is lesser than that supplied; whereas shortage exists when the quantity demanded is lesser than that supplied. In addition, in a situation where surplus exist there will be a constant drop of prices; similarly, shortage influences increased pricing (Market Equilibrium

Aircraft Crash Survival Analysis and Design Essay Example for Free

Aircraft Crash Survival Analysis and Design Essay 1. Describe the effect plowing can have on crash forces when the impact surface is soft soil. Earth gouging and scooping of soil occur when the structure makes initial contact with the ground which minimize the acceleration and force levels to which the structure is subjected. Soft soil can cause plowing and rapid deceleration if there is a large horizontal velocity component. A high-speed longitudinal impact into water can also cause high loads from water plowing as water enters through lower nose transparencies. Reducing the earth scooping effects encountered in longitudinal impacts should include a large, relatively flat surface thereby increasing the aircrafts tendency to slide over the impact terrain and by minimizing inward buckling of the fuselage nose or engine nacelle to maintain skid surface integrity. 2. Explain the term submarining in respect to the use of lap belt restraints. What human injuries may result? This is where the lap belt rides over the pelvic brim and compresses the soft tissues of the abdomen resulting in serious abdominal and spinal injuries. Submarining occurs due to the pelvis rotating under the lap belt, usually due to inappropriate location of the lap belt anchors or due to poor design of the seat bottom or a combination of both. Lap belt only restraints so commonly inflicted serious injuries on users in automobile crashes that the medical community coined a new term, â€Å"the seat belt syndrome†, to describe  the constellation of injuries caused by submarining under the lap belt. ftp://ftp.rta.nato.int/pubfulltext/RTO/EN/RTO-EN-HFM-113/EN-HFM-113-06.pdf 3. Discuss forward and rearward facing passenger seats and explain which you feel may be an advantage in crash survivability. The rearward-facing seat is optimal for providing maximum support and contact area in longitudinal impacts. The only critical impact sequence for the rearward-facing seat is one that involves a severe lateral component that allows sideward movement of the occupant prior to application of the longitudinal or vertical Pulse. However, lateral torso movement can be minimized by use of a torso restraint system of much lighter weight than that required for other seat orientations. The rearward-facing cabin seat is preferred. 4. Explain the concept and intention of Delethalization of Cockpit and Cabin Interiors. The delethalization of cockpit and cabin interiors is the design and set up of aircraft cockpits and cabins to prevent injury on impact. This is done by ensuring the occupants immediate environment be designed so that when the body parts do flail and contact rigid or semi-rigid structures, injury potential is minimized. This can be done in different manners. First is to relocate the hazardous structure or object out of the occupants reach or the hazard might be reduced by mounting the offending structure on frangible or energy-absorbing supports and applying a padding material to distribute the contact force over a larger area on the body member. The aircraft interior has occupant strike envelopes, meaning that there are hazards that are more conducive to occupant injury than others. Overall the intent is to protect the head and torso first to prevent debilitating injuries or death and then protecting the lower body parts to ensure the area hazards are clear of tripping hazards or anything that could prevent rapid escape. Typical contact hazards in the cockpit area include window and door frames, consoles, controls and control columns, seat backs,  electrical junction boxes, glare shields, and instrument panels. Contact hazards commonly found in aircraft cabin areas include window and door frames, seats, and fuselage structure. Use of suitable energy absorbing padding materials, frangible breakaway panels, smooth contoured surfaces, or ductile materials in the typical hazard areas mentioned is recommended to reduce the injury potential of occupied areas. The use of protective helmets is also recommended in certain types of aircraft. 5. Explain the expected advantage frangible fuel system attachments can provide as an aircraft post-crash survival technique. Frangible Attachment- An attachment possessing a part that is designed to fail at a predetermined location and/or load. Frangible structures or frangible bolts should be used at all attachment points between fuel tanks and aircraft structure to prevent fuel tank components from being torn out of the tank wall during impact. Frangible attachments should be used at other points in the flammable fluid systems where aircraft structural deformation could lead to flammable fluid leakage. This increases the survivability by containing any remaining fuel to the tank its encapsulated within and reducing the chance of a fire being spread throughout a crash site or into the cabin. 6. What are some of the key concerns when selecting aircraft interior materials form a crash survivability perspective? All aircraft interior materials such as seat fabrics and cushions, interior wall insulations, and nonmetallic structural components must be flame resistant and produce the least amount of smoke and toxic gases possible. 7. Describe some of the key points of post-crash design criteria associated with oil and hydraulic systems. Oil and hydraulic fluids are easily ignited and can serve as ready ignition sources for fuel meaning fluid spillage should be prevented. Oil tanks and  hydraulic reservoirs should not be located where spilled or sprayed fluid can readily be ingested into the engine or ignited by the engine exhaust. Oil tanks and hydraulic reservoirs should not be located near the bottom of the fuselage, in or above engine compartments, in electrical compartments, in occupiable areas under, in front of, or at the side of heavy masses, such as engines and transmissions, nor above landing gears Oil and hydraulic lines should consist of flexible hoses with steel-braided outer sheaths and for high-temperature; coiled metal tubing should be used. Lines should not be routed, near the bottom of the fuselage, over landing gears, under, in front of, or at the sides of heavy masses, such as engines and transmissions, in the leading edges of wings, in areas of anticipated rotor blade impact, in any area where flammable fluids could be spilled or sprayed onto hot surfaces or ingested into the engine or above electrical wiring 8. Considering aircraft electrical system post-crash survivability design, what are the guidelines concerning routing electrical wires in the vicinity of flammable fluid lines? Wiring is a prime ignition source for leaking oil, fuel or hydraulic fluid leaks or vapors. To aid in crash survivability wires should be routed above or away from flammable fluid lines and they should never be closely spaced between outer skin and fuel lines. Wires must not be routed near flammable fluid tanks unless the wires are shrouded to prevent arcing. Wires should not be routed near the bottom of the fuselage, over landing gears or in the leading edges of wings. 9. What G forces are experienced if an aircraft impacts the ground at a speed of 120 MPH and skids along the ground 50 feet before coming to rest? 9.8 G’s. 120^2/50 = 14400/50=288288x.034=9.79 10. Explain why you believe passenger airlines do not have to utilize passenger shoulder harnesses as a crash survival precaution. The passenger shoulder harness is not used for crash survival because: *  The cost of the harnesses for one would be huge to retrofit all the airliners in the fleet today and that cost would be put onto the customer. * The need for various sizes; very small through very large would result in further cost. * Comfort, if people are not comfortable then they will not have a good flying experience while others may have a fear or feeling that they are trapped. * The ability to understand how to use the shoulder harness. Most cannot figure out how to wear the harness which would delay taxiing and flight times. The required ability to quickly restrap in bad weather or to unstrap in an egress situation could be deadly. * Americans don’t like to be told what they have to do†¦.they are the paying customer.

Gun Control Essay Example for Free

Gun Control Essay Under federal law people with felony convictions, fugitives from justice, dishonorably discharged from the military, illegal aliens in the United States, or convicted of domestic violence, and restraining orders are permitted from purchasing firearms. This also includes the purchase of firearms using false statements. According to (May, 2005) â€Å"a police officer found guilty of domestic violence was reissued his firearm, because the judge stated the conviction created a manifest injustice†. This illustrates how judges in certain situations overrule the domestic violence laws, which are federally regulated. This reasoning can avoid police officers in this case from losing their firearms and their employment. This can also lead to a judge’s decision to continue to put citizens in danger. Restricting gun access can decrease homicides by firearms. Some private dealers legally sell guns at gun shows, and do business from their homes without proper background checks. This result can lead to convicted felons and suspected terrorists purchasing firearms without a background checks. Imposing harsher sentencing on illegal gun dealers, who distribute firearms without background checks, can impact they way firearms are being distributed. This would also provide for safer streets. Prior to transferring a firearm for purchase, The National Instant Criminal Background Check System (NICS) does a background check on all person(s) prior to purchase. The Federal Bureau of Investigation (FBI) accesses the (NICS), which determine if a person(s) who are prohibited from purchasing a firearms. The effect of illegally purchasing firearms is that, the firearms end up in the hands of criminals. This subsequently leads to firearms used in serious crimes, which causes harm and ultimately resulting in the death of a person(s) and at times innocent bystanders. This also affects the way law enforcement does their jobs to protect the public. The National Rifle Association (NRA) opposes gun control. The (NRA) views gun control as a violation of the Second Amendment, which state, â€Å"A militia being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed†. Firearms protect citizens from harm and even life threatening situations. The firearms purchased legally by honest American citizens, to protect themselves and their properties can deter crime and save lives. As a deterrent to violent crimes, American citizens who have purchased firearms legally have deterred crime against themselves, and their property. This has also prevented citizens, who carry firearms legally from becoming victims of serious violent crime and saving their lives thwarting of attacks. Gun control provides safety to citizens. Communities are safer places knowing that responsible American citizens are purchasing firearms legally. Not all people who purchase firearms use them to protect themselves and their property. Some people legally use firearms for the sport of hunting during certain times of the year, which is legal. Hunting related deaths by firearms are statistically are lower, than firearm related homicides each year. The people who purchase firearms legally provide positive reinforcement to public safety. The benefit of having safety features on firearms is that safety features save lives, and prevent accidental deaths. In regard to children who stay in homes where firearms are located, there are immediate dangers that present themselves. One of the dangers is that young children do not know the difference between a real firearm, and a fake firearm. Some young children are strong enough to pull a trigger. According to the (CDC, 2004) â€Å"accidental shooting deaths are most commonly associated with one or more children playing with a gun they found in the home†. Safety is very necessary, for those people who have firearms around young children to teach, and practice safety precautions. There is the need to teach safety precautions even if people do not own a firearm. Young children may need to know the dangers of firearms where ever they go. There is a possibility that they may encounter a firearm at someone else’s home. To ensure the protection of children, certain safety measures need to be under consideration. All firearms should be safely secured, and locked up. Firearms should not be accessible to children or other unauthorized personnel. The ammunition needs to be stored, and securely locked up properly. The use of trigger locks can also provided for safety. Some gun manufacturers, such as Smith and Wesson are providing safety features on their firearms. The additional safety feature would include childproof trigger locks on firearms. This is an additional form of safety for gun owners with children in their homes. This can also lead to a decrease in injuries and accidental deaths amongst children. The National Rifle Association (NRA) opposes additional safety features on firearms. The (NRA) argues new legislation laws on additional safety features, means the federal government will add more restrictions, and regulations for safety features. This would ultimately put some gun manufacturers out of business. This would also cause extra burdens for law-abiding citizens who seek to buy and sell firearms. The (NRA) also argues the new legislation laws would infringe on the â€Å"Second Amendment†, and the right for law-abiding citizens to bear arms. The impact on the homicide rate from firearms, can attest to the dangers caused by firearms being illegally purchased. The illegal use of firearms can increase the homicide rate. When criminal minded individuals can access guns illegally, the outcome of that purchase usually results in someone getting injured or being killed by that firearm. The deaths from firearms are rear in some countries compared to the United States. This can be a result of the population in other countries or the gun laws. However, the United States has seen a decrease in homicides by firearms. This can attest to new legislation laws being passed, strict regulations on gun manufacturers, and gun being kept from criminals by way of proper screening through database in which The Federal Bureau of Investigations, State police, and local authorities have access to. The rate of suicides and accidental deaths from the use of firearms attribute to gun not being securely stored in house-holds. There were over 31,000 firearm deaths in the United States in 2005. Firearms deaths were at an all time high in 2005. [pic] The (CDC, 2005) concludes that â€Å"suicide remains the highest cause of death by firearms†. According to (Hemenway, 2007) â€Å"One of the strategies for reducing firearms suicides is the removal of the firearm from the home, where there adolescents, and young adults. Children are also victims of accidental gun deaths. This can also be attributed to excessive guns in the communities and areas where children frequent such as schools, and playgrounds. The impact of firearm safety and training is also important in reference to saving lives. There are numerous gun training and safety organizations to help the law abiding citizens, with gun safety or self defense. Some organizations include the National Rifle Association (NRA), and Front Site Firearm Training Institute. Since firearms injuries affect children and teenagers classes are taught to children. This would help the children learn the dangers of guns and to stay away from guns. This would also help children identify and report any guns found or not safely secured. The increase in firearm deaths amongst children is on the rise. The lack of awareness can be fatal to children not aware of the dangers of gunplay. Volunteer training can also can decrease firearm incidents. Firearm related incidents have an impact on health care. According to (Beasley, Theodore March 2006) â€Å"firearms injuries are a major public health issue, with a significant impact on society in both economic and human terms†. The medical cost of gun violence put a burden on health service providers. The effect factors in mental health, rehabilitation, legal, and judicial cost. The cost of gun violence in the United States can range from 100 billion dollars annually. Gun control provides for safer schools and communities. In the wake of the Columbine shooting, and the shooting at Virginia Tech laws are being passed to make sure schools are safe for students to attend, and communities are safe for people to live in. To ensure communities and schools are safe, communities have to be a part of the process. This may include groups such as neighborhood watch, to report any illegal activity observed in the community or around schools especially where children frequent. Illegal activity such as drug dealing poses a high risk to children. This can attest the gun being involved which are used to protect drug dealers and their turf, which is ultimately the community the children play in. There are also gangs that factor into illegal activities. These gangs also protect the neighborhoods or turfs with guns. The dangers involved result in drive by shootings, which can injury or kill innocent individuals. They also recruit young children to participate in these gangs. This also exposes children to illegal activities, which include giving young adolescents firearms to protect themselves from rival gang members and to protect their turf. These high crime areas continue to involve individuals who obtain firearms illegally. Some poverty stricken neighborhoods see an increase in firearm violence, due to the environmental surroundings. This would include public housing projects, and other low income housing areas surrounded by drugs, prostitution, gangs, and illegal gun activity. These neighborhoods see an increase in violent crimes by firearms, such as assaults, robbery, and murder. This can also attest to the young adolescents that bring firearms to school. The men and women of law enforcement are also at risk against legally obtained firearms. This is because suspected criminals can be armed and dangerous. The dealers, who sell firearms without proper screening, put the public’s safety at risk. Law enforcement officers are not equipped for the type of gun power these criminals’ possess. Some criminals possess assault weapons, which are military style weapons. If the weapons get into the wrong hands of criminals, these weapons can impose at grave risk to law enforcement, often putting law enforcement in grave danger trying to protect the public. There are law enforcement officers that have die at the hands of firearms. This is a result of handguns and assault weapons being purchased by criminals. Law Enforcement deaths by firearms since 2005 [pic] National Law Enforcement Memorial Fund (2008) The law enforcement officers killed in the line of duty has declined since 2007. Law enforcement agencies adopted new safety measures to assure law Enforcement were better equipped to apprehend suspected criminals who carry deadly firearms. Do Americans citizens want guns illegally circulating in their community? Individuals and criminals purchase guns illegally every day.

Vulnerable Population Health

Vulnerable Population Health Introduction Vulnerable population has become a burden for the United States as because their lacks of economic stability, improper health care service, social ignorance and so many other controversial factors. As they are considered as an important portion of the total U.S. population, thats why they are to be treated equally compared to the other U.S. citizens. One of the complex issues in their current situation is their health related problems. Their mental health problem and the drug abuse are two issues that have made them out of success. The goal set by the U.S. department of health and human services named â€Å"healthy people 2010 goals† is largely depends on this vulnerable population. Furthermore, in addition others things are also becoming obstacle to get the success. Hispanics and African American represent a large portion of entire U.S. population. Hispanics generally come from the Latin countries and Africa American from the content Africa. But the most important fact is that, among them a huge number of people are homeless and it is to be said the self-contradictory characteristic of U.S. the richest country of the world. These communities are suffering from improper health care services and have the high tendency to suicide. Their education background is also vulnerable compared to the whites. In this case the nurses can play a major role in regarding both providing the better health care services and educate this vulnerable population. There are also some other health related problems that can be solved by making a positive atmosphere by the nurses. The nurses need to know and understand in what circumstances they will act and how they will do that. The homeless population is a social group considered as a vulnerable because these homeless are at an increased risk for adverse health-related outcomes. Recognize and understand the homelessness and the relationship From the last two decades a good number of American cities experienced epidemics which challenged some beliefs. These people are concerned for affecting with HIV, violence, substance abuse, asthma, infant mortality or so many others factor. The vulnerable population is to be said the most sufferers in this case. However, there are a lot of complexities in regarding the health issues from the perspective of this population. Now, in America ‘a huge number of homeless people is a huge headache for the government as well as for the health and human services. This homeless inner city Spanish people are not only poor but also weak in health. According to the ‘human Rights Record of the United States in 2005, US has 727,304 homeless people nationwide. It reminds tha t one in every 400 Americans are living without home. The Los Angeles, according to the statistics is the capital of homeless people. The United States dubs that it is the worlds richest country, but the report given by the London school of Economics represents that U.S is has the highest poverty rate among the developed countries. This report also says that U.S. has the worst social inequality. Among them the Hispanics are at the top of the list. Now this community includes approximately 35.3 million people. By 2050, approximately 102 million Hispanics will reside in the United States which is nearly 24.5 percent of the total U.S. population. So it is needless to mention that if Hispanics experience poorer health status, then the expected demographic change will magnify the adverse economic, social, and health impact of such disparities in the United States. (J. Pumariega n.d.). Hispanic origin women can be from any race. According to estimation the Hispanic includes 63 percent Mex ican American, 14 percent central and South Americans, 11 percent Puerto Ricans and the rest 8 percent are from other. Among them 90 percent resides at the urban areas and 70 percent concentrated in 6 states-California, Texas, New York, Florida, New Jersey and Illinois. Black or African American are second at the list of vulnerable population in the United States. This origin has more undetected diseases and more chronic diseases comparatively to the whites. Inadequate housing, dangerous job and improper medical care represents the limited access of African American to the prerequisites for improved and safety health status includes better education, higher incomes and use of health care services as needed. Various types of risk factors are also involved in the daily activities of this population. â€Å"U.S. Department of Health and Human Services Healthy People 2010 goals† has provided several instructions in regarding to the health issues of this vulnerable population. The large portions of this vulnerable population are suffering from mental, psychiatric and substance abuse problem. Besides this the drug problem should be mentioned if health related factors described. The Hispanics are more than two times more likely than whites to indicate current drug abuse. So, such types of problems lead to a number of big problems that is quite impossible to handle. To improve and develop the health of this population, the nurses can keep a major role strongly. The nurses need to understand the various nursing environment and they should response in accordance with the environment. In the environment of vulnerable population the nurses expand their knowledge base in leaps and bounds. The nurses need to be supported into this field and others. Health issues Mental problem The previous study found that the ratio of homeless people is highest among the Hispanics. As these Hispanics are homeless, they suffer from various kinds of mental problems and that is a national concern as well. Hence, the street beggars and those sleeping in public places have increased among the Hispanics. Homeless people are in want of emotional support, caring professionals and help that work within their frame of reality. Notably, each homeless group has different demographics and health needs. There are some denominators that are the obstacles in regarding to access health care. Nurses are the best effective means of serving the needs of these homeless people. Nurse-managed clinics can be a better solution to provide these needs and wants. However, with the help of these clinics homeless people can get continuity of care, suitable follow up, and teaching to aid in illness prevention. The freer clinic needs to be established so that the nurses can provide and meet the health n eeds and of homeless community. Among the Hispanics the mental, psychiatric and substance abuse problem has described as one of the problem of health issues. Another problem is the drug abuse problem. Several recent reports and researches provide the identified problems in access to and caring services that affects the Hispanics groups. The 2006 national healthcare Disparities report says that Hispanics scored lower that European American on 90% of access measures. (Armando W. 2007 et all) The focused research of this report is to improve the systems of care in order to deliver more equitable services. But the question is who will provide this desired service to this population and how they will do it. Point to be noted; â€Å"only 1% of licensedpsychologists and American Psychological Association membersare Hispanic†. (Armando W. 2007 et all). So, generally they are not in the field of getting proper support in their mental problems. It is known that the Hispanics are not efficient in speaking English. So when they conduct with the health service provider then as expected they got lower facilities because of language barriers. However, who are expert in English get more facilities and most severe symptom ratings, followed by those who spoke only English or only Spanish during the interview. Health insurance is a critical issue in Hispanic health factors. One third of the Hispanic population lacks it, which is double the national average. Hispanics comprises the largest ethnic minority group in the United States. The previous study found that â€Å"Mexican immigrants had considerably lower lifetime prevalence rates of major mental disorders than did-U.S. born Mexican Americans.†(R. Lopez, 2000). There are some demographic and risk factors in the perspective of Hispanic vulnerable population. The prevalence of mental health problems varied by racial or ethnic group. Among State prisoners, 62% of white inmates, compared to 55% of blacks and 46% of Hispanics, were found to have a mental health problem.(J. James E. Glaze, 2006) Among Hispanics Americans fewer than 1 in 11 do contact with specialist and 1 in 5 contact general health care provider. One national study found that only 24 percent of Hispanics received appropriate care compared to 34 percent of whites. What nurses can do The psychiatric-mental health nurses are efficient and educationally prepared to provide the full range of health services. The primary mental health care services are the first needs to face the challenges. To do so, some especial educational programs should be provided to the nurse practitioners.teh psychiatric-mental health nurse practitioner is advanced practice registered nurses who focus to develop the psychiatric disorders or mental health problem. They provide the wide range of settings to the patients who are seeking primary mental health services. The promotion of optimal mental health, prevention and treatment of mental health problem are the function of these nurses. They play a vital role in assisting people to identify the causes of the possible results of stress. Nursing care can be delivered on a one to one basis. The mental health nurses play a key role in the primary health care team efficiently. They are also expert in health education and promotion, seeking the ge neral public Substance abuse Substance abuse refers to the abuse of drugs or alcohol that is primarily illicit. Hispanics are mostly known as â€Å"hard-to-reach† population in the context of health communication. Drug use among Hispanics has a sparse which is vastly higher than among who are surrounded by their own culture. Drug abuse among the Hispanics is another concern for the government as well as for the future generation. The following are the risk factors in regarding to the drug abuse among the Hispanics in United States. Rates for illicit drug abuse and dependence are highest for Hispanics (7.8%). Hispanic adolescents are more likely to abuse drugs; especially crack cocaine, heroin, and ‘ice, than are adolescents from other ethnic groups. An overview of U.S. Department of Health and Human Services Healthy People 2010 goals Healthy people 2010 is planned to achieve two overarching goals: Increase quality and years of healthy life The first step of â€Å"healthy people 2010† is to help individuals of all ages increase life expectancy and improve their quality of life. Eliminate health disparities: The second goal of healthy people 2010 is eliminate the health disparities among different segment of the population. ‘Healthy People 2010 is a set of health objectives for the Nation to achieve over the first decade of the new century. It can be used by many different people, States, communities, professional organizations, and others to help them develop programs to improve health. Healthy People 2010 builds on initiatives pursued over the past two decades. The 1979 Surgeon Generals Report, Healthy People, and Healthy People 2000: National Health Promotion and Disease Prevention Objectives both established national health objectives and served as the basis for the development of State and community plans. Like its predecessors, Healthy People 2010 was developed through a broad consultation process, built on the best scientific knowledge and designed to measure programs over time. Healthy people objectives have been designed by the congress as the evaluation for assessing the development of the Indian health care improvement act. What nurses can do in regarding homeless Hispanics or African American and their mental health problem Mental health nurses advocate in collaboration with psychiatrists and the other practitioners to provide services as for example monitoring the Hispanics patient, mental state, managing medication and developing the links to other health care professionals and clinical service providers. Their providing services are in a range of setting and are provided at little or no cost to the patient. The homeless Hispanics and African American both are growing rapidly in context of population. They are not only growing but also their mental health is dis-improving day by day as they are considered as vulnerable population. It has been mentioned earlier that Hispanics are the largest minority community in the United States. The percentage of homeless African American is also high in United States. They are also vulnerable because of most of them are homeless and suffering from controversial mental health problem. They do feel some bad feelings about their origin root and thats why they are still in back position. In this regard, the nurses can play a major role to manipulate this community to improve their mental health. Mentality is the drive that influences people toward every outcome whether it is positive or negative. Hence, the nurses role in educating the Hispanics homeless population about how to access health care and addresses their health needs should be reflected in a systematic manner. The nurses can make them understood about the benefit of better health that will make them established at their desired level. There are a lot of people among the Hispanics who are not able to say or understand the English. In this case, the nurses have a better opportunity to teach them about the benefit of speaking English. Whenever you talk about the vulnerable or homeless people then the word needs to mention. The racial issue is a very sophisticated factor in regarding the vulnerable population. It does reflect the whole picture of vulnerable population in America. The vulnerable population should be treated in accordance with the proper plan and therefore, there also should not be any complexity. Notably, here needs to talk about the nursing aids and its function. Nursing aids is to care for physically or mentally weak, injured, disabled, and mental health setting. Nursing aids is applicable for those who are in need of a long term care. Their specialty is defined by their specific care. In context of homeless Hispanics, these nursing aids should be implemented to get the better result and overcome the problem existed among this community. The nursing aids help elderly or disabled person live in their own home instead of health care facilities. The nurses can give the instruction about how the homeless Hispanics can lead a better life after being educated and having a good health. Therefore, the better health is needed to fulfill the goals set by the â€Å"healthy people 2010† project. Lower rates of health care use by Hispanics judge against with non-Hispanics white person-in context of hospitalization, physician visit, prescribed medicine, and specific preventive service—have been found. A numerous studies found differences in culturally based attitudes in regarding health care and barriers presented by language. It has been also found that Hispanics who are less assimilated into U.S. culture face more wide-ranging barriers than those who have become acculturated with U.S. culture. Hence, there is an impact on the basis of relation between culture and use of service is quite mixed. In addition, insurance status has a larger impact on use of health care services. It is duty for the nurses to identify the specific factors that affect the function of health care services for this vulnerable population. Nurses should advocate and educate this vulnerable population. Nursing around the world needs to feel the confident and the essential and significant contribution to the provision of safe, quality patient care. It is known that the nursing workforce is the largest group within the health care system. The theoretical and practical knowledge not only guide the nurses, but also the beliefs, values and personal thinking help them to emerging advance scope of practice. Homeless Hispanics are to be said the obstacle for the U.S. developing program ‘healthy people 2010 and its success. The Hispanics are suffering from different kinds of mental health problem which is day by day going to be uncontrollable. Homeless people do not get the at least primary health service in most of the cases. As it is known that by 2050, the Hispanics will be approximately 25% of the total U.S. population. So, these successes of the â€Å"U.S. Department of Health and Human Services Healthy People 2010 goals† are very much dependent on their health care. What nurses can do in regarding homeless Hispanics or African American and their drug abuse problem Drug abuse among the Hispanics and African American minority, is a strong concern as it has a larger impact on future generation. The people who are involved in drug abuse can be considered as patient from the medical perspective. However, drug abuse is becoming a growing distress for the U.S. government as well as for the health and human service. The qualities of substance abuse treatment are of interest to both the government and the treatment service provider. There has been a little research on treatment outcomes of Hispanics and African American in substance abuse treatment. However, Nurses have the potential to continue integrated interventions from the perspective of health care setting. The needs of the patients vary with the change of health care setting and the function of nurses as well. So, the field nurses need to clarify their roles and functions in relation to both the setting where they work and the patients to whom they deal with. The healthcare professionals need t o demonstrate the effectiveness of what they are used to do and how they do to maintain the quality of patient care. Substance abuse is to be said as the abuse of alcohol and other drugs. â€Å"Most culturally distinct groups have used and abused alcohol and other drugs throughout the ages, and they have established codes of behavior in their approach to drugs and alcohol†. Alcohol and other drugs have been used among the Hispanics or African American minority for thousands of years. Socio-cultural beliefs can shape the approach to and behavior regarding substance use and abuse. Culture plays a central role in forming the expectations of individuals about potential problems they may face with drug use. For many social groups, this may provide a protective factor. An example is the use of alcohol by the ancient Aztecs before any contact with white settlers. Their use of alcohol was heavily regulated and was only for ceremonial purposes. Non-ceremonial use of alcohol was strictly forbidden under penalty of death.3,8 Another example is the development of the peyote cult in northern Mexico. Peyote was used in a ceremonial setting to treat chronic alcohol addiction. This use later became a central part of the Native American church, which provided important spiritual treatment for chronic alcoholism. Recent research found that despite declining trends in use of drug abuse among the American youth, drug use among Hispanics youth remains alarmingly high. So in this case what the nurses can do is the million dollar question. The nurses provide their service in very practical way and for that reasons the result or outcome is always good. The African American has the highest tendency to use the drug and it is more likely in the youth generation. but the homeless African American or Hispanics are considered as the vulnerable population and they have not the ability to deal with these problem. In regarding this matter, the nurses can be used as a very effective tool. However, nurses will teach this vulnerable population about the bad effects of drug abuse and how is ruining their personal and family life as well as the society. Nurses normally meet legal issues in their place of work. However, many of them are either unaware of their significance or unable to face these issues. Since the findings of the study identify that learning at workplace has been valuable to gain knowledge about law, it is needed to identify legal issues in their workplace. This will help them to increase their efficiency because knowledge about legal issues upgrades their sense about their tasks. These issues provide direction that what needs to do or not to do. They should focus only how the problem can be removed in this area. The â€Å"healthy people 2010† is not just a dream, it is more than that and the homeless Hispanics or African American are the barriers of this dream. This dream should be reflected by the activities performed by the nurses. Conclusion: Now-a-days nursing has developed its all functional activities in accordance with technological, political or socio-economical rapid change. The changing boundaries of professional responsibility and its influence on their scope of practice have been emerged. For the effective care the nurses must all work together toward a common goal to meet the needs and serving the interest of the patient. According to the UKCC code of professional contact, clause 4 states that in the exercise of professional accountability, the registered nurse must, â€Å"Acknowledge any limitations in your knowledge and competence and decline any duties or responsibilities unless able to perform them in a safe and skilled manner.† (Turnbull Mark) However, Hispanics are becoming a large portion of U.S. population day by day and they are in need of the proper health care services. A lot of barriers are involved in regarding their health problem whether it is mental or about drug abuse. The nurses are to be said as the key element who can work together in the field to make a better move of health care services for the homeless Hispanics and African American.

Parental Involvement in Education Essay -- Parent Involvement in Educat

Parent Involvement in Education Parent involvement in a child’s education is vital to their success. Many students do really well in school while others fail. There is an obvious correlation between the accomplished children and their involved parents. I think that parents just need to be there for a child to succeed. If a mother is the head of the PTA it is easier for her child to do well. As head of the PTA the parent is able to know the due dates of assignments and then help her child complete the assignment. It is easier for a child to thrive when their parent is there with them while they are doing homework. If a parent just asks to see a child’s assignments they will feel like what they do in school matters, and then they will want to do well in school. This will give the child a feeling of reward, and everyone wants to work hard and receive a reward. I would like to know if all children benefit when their parents get involved with their education. Are there some parents that are too involved? Where is the line drawn between not involved and being involved too much? Are parents supposed to still be involved in high school to help with their children’s success? What are the most common reasons why children fail in school? Why is there a lack of parent involvement? Parent involvement in children’s learning will increase the chances their child will succeed. It is characterized in three different levels. Dr. James Comer of Yale University describes the first level as general participation. This is the most common form of involvement and this includes signing papers, going to conferences, and attending school sponsored activities. Sponsoring school programs and helping in the classroom is the sec... ...ent Is as Easy as PIE! Education World. (1). Retrieved March 7, 2004 from the World Wide Web: http://www.education- world.com/a_curr/curr030.shtml Keith, K. K. (2002). The Assignment Checklist [Electronic version]. About (1), 1. Plevyak, L. (2003, October). Parent Involvement in Education: Who Decides?. Education Digest, 69(2), 32-39. Retrieved March 7, 2004, from Academic Search Premier database. Ramey, S. L., & Ramey, C. T. (1999). Going To School. New York: Goddard Press, Inc. Schlosberg, J. (1996, January). Get involved; when parents participate, children succeed. Better Homes & Gardens, 24-27. Stein, M. R. S., & Thorkildsen, R. J. (1999). Parent Involvement In Education. Bloomington: Phi Delta Kappa International. U.S. Department of Education. (1997). Family Involvement in Children’s Education. Washington: U.S. Government Printing Office.

Government Providing for the Poor :: American America History

Government Providing for the Poor "In the Middle Ages men were united by custom and prescription into associations, ranks, guilds, and communities of various kinds. These ties endured as long as life lasted. Consequently, society was dependant, throughout all its details, on status, and the tie, or bond, was sentimental. In out modern state, and in the United States more than anywhere else, the social structure is based on contract, and status is of the least importance." This quote by William Graham Sumner in his 1883 speech "What Social Classes Owe to Each Other" illustrates my main focus of this week's proposed question, "Does American Government have an obligation to provide for the poor?" Sumner supports that the American Government does not have an obligation to provide for the poor because in America, all people have the opportunity to work hard and bring themselves out of poverty, where in Europe and their other native lands, people were trapped in a caste system in which they could not escape. In America, th ere was is a defined class system in which those living in the society were confined and hard work, followed by success, is a luxury offered in America. By living in a free state like America, Sumner says, its citizens live equally among one another in a society based on a contract, which allows the most leeway for individual developments and successes. Every man must fend for himself in this society that allows for personal establishment. Sumner also says, "It follows, however, that one man, in a free state, cannot claim help from, and cannot be charged to give help to, another." He directly says that it cannot be imposed upon the American Government that hard-working tax-paying citizens should have to financially assist the plight of the poor. The Populist Party Platform of 1892 says in its second declaration that "Wealth belongs to him that creates it...If any will not work, neither shall he eat." The Populist Party realized that men were fully entitled to their earned keep and s hould they not work, they should not be provided for by the government, especially not by collected tax money. Sumner goes on to say that those who rely on the support of the government become so dependent that welfare inevitably produces lazy citizens. He says, "The man who has nothing to raise himself above poverty finds that the social doctors flock about him, bringing the capital which they have collected from the other class, and promising him the aid of the State to give him what the other had to work for. Government Providing for the Poor :: American America History Government Providing for the Poor "In the Middle Ages men were united by custom and prescription into associations, ranks, guilds, and communities of various kinds. These ties endured as long as life lasted. Consequently, society was dependant, throughout all its details, on status, and the tie, or bond, was sentimental. In out modern state, and in the United States more than anywhere else, the social structure is based on contract, and status is of the least importance." This quote by William Graham Sumner in his 1883 speech "What Social Classes Owe to Each Other" illustrates my main focus of this week's proposed question, "Does American Government have an obligation to provide for the poor?" Sumner supports that the American Government does not have an obligation to provide for the poor because in America, all people have the opportunity to work hard and bring themselves out of poverty, where in Europe and their other native lands, people were trapped in a caste system in which they could not escape. In America, th ere was is a defined class system in which those living in the society were confined and hard work, followed by success, is a luxury offered in America. By living in a free state like America, Sumner says, its citizens live equally among one another in a society based on a contract, which allows the most leeway for individual developments and successes. Every man must fend for himself in this society that allows for personal establishment. Sumner also says, "It follows, however, that one man, in a free state, cannot claim help from, and cannot be charged to give help to, another." He directly says that it cannot be imposed upon the American Government that hard-working tax-paying citizens should have to financially assist the plight of the poor. The Populist Party Platform of 1892 says in its second declaration that "Wealth belongs to him that creates it...If any will not work, neither shall he eat." The Populist Party realized that men were fully entitled to their earned keep and s hould they not work, they should not be provided for by the government, especially not by collected tax money. Sumner goes on to say that those who rely on the support of the government become so dependent that welfare inevitably produces lazy citizens. He says, "The man who has nothing to raise himself above poverty finds that the social doctors flock about him, bringing the capital which they have collected from the other class, and promising him the aid of the State to give him what the other had to work for.